B-1
8 Electromagnetic compatibility
The device meets the requirements of IEC 60601-1-2.
Warnings and Cautions
•
This device should not be used in the vicinity or on the top
of other electronic equipment such as cell phone, transceiver
or radio control products. If you have to do so, the device
should be observed to verify normal operation.
• The use of accessories and power cord other than those
specified, with the exception of cables sold by the
manufacturer of the equipment or system as replacement parts
for internal components, may result in increased emissions or
decreased immunity of the equipment or system.
Guidance and manufacturer’s declaration
– electromagnetic emissions
The model ECG recorder is intended for use in the electromagnetic environment
specified below. The customer or the user of the model ECG recorder should
assure that it is used in such an environment.
Emissions test
Compliance
Electromagnetic environment – guidance
RF emissions CISPR
11
Group 1
The model ECG recorder uses RF energy only
for its internal function. Therefore, its RF
emissions are very low and are not likely to
cause any interference in nearby electronic
equipment.
RF emissions CISPR
11
Class B
The model ECG recorder is suitable for use in
all establishments, including domestic
establishments and those directly connected to
the public low-voltage power supply network
that supplies buildings used for domestic
purposes.
Harmonic emissions
IEC 61000-3-2
n.a.
Voltage fluctuations/
flicker emissions IEC
61000-3-3
Recommended separation distances between portable and
mobile RF communications equipment and the A&D unit
