manualshive.com logo in svg

VIASYS Bear Cub 750PSV, Service Manual, Page: 85 / 98

Share
Download
VIASYS Bear Cub 750PSV Service Manual Download Page 85

Service Manual 

 

85 

 

of SYN (16h) or DLE (10h) appears in the data packet (including the Check Sum, 
see below) an escape sequence will be used.  The illegal character will be preceded 
by the DLE character and 10h will be subtracted from its original value. 

The second character in each packet (both transmitted and received) is defined as 
the ID character.  Valid ID characters are defined in tables 9-3, 9-4 and 9-5. 

All other ID's are undefined at this time or are for internal use only.  Any request for 
data using an undefined ID will be responded to by either the transmission of 
undefined data or will be ignored by the ventilator. 

The Check Sum [Check] is defined as the one’s complement of the sum of all data 
contained in the data packet excluding the “SYN” and “CHECK” characters. 

Table 9-3:  Valid Requests Received by the Ventilator 

Format: 

[ SYN ] 

[ID] 

[Check] 

[ SYN ]:

 16h 

[ ID ]:

 

20h 

Send all Adult Control Settings 

 

40h 

Send all Adult Alarm Settings/Status 

 

60h 

Send all Adult Monitored Data 

 

A0h 

Send all Infant Control Settings 

 

C0h 

Send all Infant Alarm Settings/Status 

 

E0h 

Send all Infant Monitored Data 

[ Check ]:

 Check 

Sum 

 

Table 9-4:  Valid Message Transmitted by the Ventilator 

Format: 

[ SYN ] 

[ID] 

[Data #1] 

[Data #n] 

[Check] 

[ SYN ]:

 16h 

[ ID ]:

 

00h..0Fh 

Real Time Data, No Alarms 

 

10h  1Fh 

Real Time Data, Alarm Condition 

 

20h 

Adult Control Settings 

 

40h 

Adult Alarm Settings 

 

60h 

Adult Monitor Settings 

 

A0h 

Infant Control Settings 

 

C0h 

Infant Alarm Settings 

 

E0h 

Infant Monitor Settings 

[ Data #X ]:

 Binary 

Data 

[Check[:

 Check 

Sum 

 

L2346 

Revision B 

June 2004 

Summary of Contents for Bear Cub 750PSV



































































































Reviews:

No comments