ViaSat MEOLink, User Manual, Page: 17 / 154

1141780,
Rev 002vx
2 ‐ 9
MEOLink User Manual
8. rfcal (directory for custom calibration files)
9. u ‐ boot.bin
2. To update the Modem Flash with the newly installed files on the boot server, follow
the procedure described in 2.1.3 and 2.1.3.1
2.1.1.2 Modem Flash Installation via FTP
For FTP site setup (no TFTP Server), load release files (example is for release 03.00.05) into
the MEOLink modem as follows:
1. Load the files from your PC, Laptop or other computer to the MEOLink modem
using FTP follows
a. ftp <modem ‐ ip ‐ address>
b. Name: o3b
c. password: o3b
d. ftp> pas
e. ftp> bin
f. ftp> put o3b ‐ 03.00.05.tar.bz2
g. ftp>put o3bboot ‐ 03.00.05.tar.bz2
h. ftp>quit
2. To update the Modem Flash with the newly installed files on the boot server,
follow the procedure described in 2.1.3 and 2.1.3.1 Section 2.1.3.2
2.1.2 MEOLink Modem Operator Login and Main Menu
Use this information to connect to the modem initially. To change these values, follow the
steps below.
1. Log into the modem via Telnet using the modem’s default IP address
(192.168.2.177)
Figure 5: Telnet Login
2. Enter user name operator and password o3bo3b and press enter. The public license
information and main User Menu appear.