ViaSat 8016, Installation And Operation Manual

Page: 10 / 141

Safety Summary
SAFETY SUMMARY
Notice
Any service, adjustment, maintenance, or repair of this product must be
performed only by authorized technical service personnel.
Prior to installation and use of this product review all safety markings and instructions.
When safety precautions or important information is presented in this manual, the
information will normally be presented just prior to the point where the hazard is likely
to be encountered.
The following symbols are used throughout this manual to bring attention to practices,
procedures, and conditions important to the safety of the operator and equipment or to
obtaining desirable results from the equipment.
This symbol warns of electrical shock hazards
to personnel. Failure to comply with the
instructions of such a warning may result in
severe injury or death resulting from electrical
shock.
This symbol warns of non-electrical hazards to
personnel. Failure to comply with the
instructions of such a warning may result in
severe injury or death.
This symbol warns of hazards to equipment.
Failure to comply with the instructions of such
a caution may result in damage or destruction
of equipment.
This symbol is used to bring attention to
installation grounding requirements.
NOTE
Notes are used to provide clarification, or to
alert the reader of possible erroneous results,
which may occur if a procedure is not
followed as written.
42S132E ix