APPENDIX 5 DVR BATTERY REPLACEMENT
52
'$$)
1 .
"'&&) ,
)$*'#) ) &
DVR time reset after power failure, for example, caused by a power outage, will cause the
disorder of the recorded data, and users may have problems in searching the event clip they
want. To keep the DVR time from resetting, a non-chargeable lithium battery,
CR2032
, is
installed in the DVR.
However, the DVR time might still get reset when the DVR battery is low or even running out of
power. If so, please replace the DVR battery, CR2032,
right away
as instructed below.
How to replace CR2032
"
% :@=:
!
. " "
"
5
J
"
.
Step1: Stop all DVR recording
immediately
to prevent the disorder of the recorded data.
Then, back up the recorded data if necessary.
Step2: Power off the DVR, and disconnect the DVR power.
Step3: Remove the DVR cover, and find the battery on the mainboard.
Step4: Push the release as indicated below to remove the battery.
Step5: Get a new battery with the side of “CR2032” facing up, and install it to the mainboard.
Step6: Replace the DVR cover and connect to power.
Step7: Set DVR date & time, and resume recording. For details, please refer to “2.4 Date and
Time Setting” at page 10, and “5.2 Record” at page 19.
Summary of Contents for AVC 796A
Page 42: ...REMOTE OPERATION 37 ...