FREQUENTLY-USED FUNCTIONS
24
Make sure the ID setting of the camera is the same as the setting here, or the DVR
will not be able to control the device.
5 A
3) PROTOCOL
Select NORMAL (our protocol), P-D (PELCO-D) or P-P (PELCO-P) protocol.
4) RATE
Select the baud rate for the connected PTZ camera (2400 / 4800 / 9600 / 19200 /
57600 / 115200).
Make sure the baud rate setting of the camera is the same as the setting here, or
the DVR will not be able to control the device.
"
5 A
5.6 System Setting
5.6.1 Password Setting
Right-click to display the main menu, and select “SYSTEM” “TOOLS”.
6-+, -,;
;+,6 &
C ;) +#*
- ) + 5-
(*
;
5
-%B 5
*5; - * 5-
(*
;
5
-%B 5
5, - ;
)
;<
1) ADMIN PASSWORD
Click “SETUP” to change the administrator password. The default administrator
password is
0000
.
When you’re prompted to enter the DVR password, enter the administrator
password, and
will be shown on the status bar of the screen and all operations
are allowed.
2) OPERATOR PASSWORD
Click “SETUP” to set or change the operator password. .
When you’re prompted to enter the DVR password, enter the operator password,
and
will be shown on the status bar of the screen and the main menu is
NOT
allowed to access.
Summary of Contents for AVC 796A
Page 42: ...REMOTE OPERATION 37 ...