Viakom AVC 796A, User Manual, Page: 14 / 61

CONNECTION AND SETUP
9
For DVR PIN configuration, please refer to “APPENDIX 6 PIN
CONFIGURATION” at page 53. For connection details, please check with your
installer.
STEP 5: Set the speed dome camera at the DVR side.
Go to “ADVANCE CONFIG” “REMOTE” to set the speed dome camera.
a) Select the device to “PTZ”.
b) Set the ID to the value the same as the one set in the speed dome camera.
The default ID of the camera is 000.
c) Select the protocol to “NORMAL”.
d) Set the baud rate to the value the same as the one set in the speed dome
camera. The default baud rate of the camera is 2400.
%-+; - %&' %&: %&= %&0 %&1 %&9 %&3 %&> %&? %&'@ %&''
; ;% *+ ; %; 5 A
-6; @@@
+; (* B 5 * *%*6 +* )-6
+ 5 - ; :0@@
56-C
;%*
;<
2.3 DVR Power On
This device should be operated only with the type of power source indicated on the
manufacturer’s label. Connect the indicated AC power cord to the power adapter, and
plug into an electrical outlet. The power LED will be on.
! "
4 6% % 7
"
D
5 " 5 4 * 7