TLC PLUS COMPRESSOR KIT
USER MANUAL
USING THE TLC TIRE INFLATOR
1. Connecting the TLC inflator:
Select an inflation attachment and connect it to the TLC Inflator Quick-Connect Coupler. Then,
connect the Inflator to an air hose by inserting the Quick-Connect Stud into the air hose coupler.
2. Inflating/Deflating Tires:
To inflate, squeeze the Inflation Trigger by pressing it towards the handle of the inflator, this will
allow air to flow into the tire. To deflate, press the Bleeder Valve located on the side of the body,
this will release air from the tire.
3. Checking Tire Pressure:
To check tire pressure after inflation/deflation, simply release the Inflation Trigger or the Bleeder
Valve. This will allow the needle in the gauge to settle and show the accurate pressure reading.
You can also check tire pressure by simply connecting the TLC Inflator to a tire valve stem.
4. Storage:
Always store the TLC Inflator in the carry bag provided to protect it from impact or damage.
WARNING:
• Never operate at any pressure exceeding the max reading on the gauge.
• Use caution when attaching or removing air chuck from valve stems.
• Always ensure that tire valve stems are tight before inflating.
• Never inflate any tire or other inflatable past its rated pressure to avoid explosion, possible injury or death.
WARNING:
Not intended for use with regular portable compressors (units meant to be operated
with an open-ended air chuck). The TLC Inflator is equipped with a close-ended quick coupler
(will hold pressure back).
REBUILDABLE PRESTA HEAD
Over time, tubeless sealant can clog the internals of the Inflator and make it hard to setup your
tires. That’s why we designed the Presta Head attachment to be easily rebuildable, so you can
clean it periodically and maintain maximum performance. Refer to the diagram below for assembly
instructions.
Bleeder Valve
Quick Connect Stud
Inflation Trigger
Quick Connect
Coupler
Gauge
*Tolerance: ± 3%
HEAD CAP
3MM O-RING
HEAD
1MM O-RING
QUICK CONNECT STUD (M)
