TLC LITE COMPRESSOR KIT
USER MANUAL
REBUILDABLE PRESTA HEAD
Over time, tubeless sealant can clog the internals of the Inflator and make it hard to setup your
tires. That’s why we designed the Presta Head attachment to be easily rebuildable, so you can
clean it periodically and maintain maximum performance. Refer to the diagram below for assembly
instructions.
HEAD CAP
3MM O-RING
HEAD
1MM O-RING
QUICK CONNECT STUD (M)
COMPRESSOR MAINTENANCE & REPAIRS
a. Drain Coil Hose and tank after each use.
b. Replace compressor air filter element periodically. Replacement frequency depends on operating
frequency and operating environment. For frequent use in dusty environment, we recommend that
you replace air filter element at least once a month.
c. Regularly clean dust and dirt from compressor cooling fins and/or motor housing.
d. Your air compressor is equipped with a permanently lubricated, maintenance-free motor. Never
try to lubricate the compressor.
e. All repairs should be performed by Manufacturer or Manufacturer’s Authorized Service
Agencies only.
f. For complete information regarding VIAIR Warranty, please visit:
www.viaircorp.com/warranty
SPECIFICATIONS:
00071 – TLC LITE COMPRESSOR KIT: (CE Certified)
Part Number:
00071 / TLC LITE
Voltage:
12-Volts
Max. Amp Draw:
13-Amps
Recommended Fuse:
15-Amps
Motor Type:
Oil-less, Permanent Magnetic
Max. Working Pressure:
105 PSI *
Max. Duty Cycle (@ 72ºF & 100 PSI ): 10%
Minutes On/Off (@72ºF & 100 PSI):
6 On / 54 Off
Max. Ambient Temperature:
158°F
Min. Ambient Temperature:
-40°F
Auto. Reset Thermal Protection:
Yes
*
Do not exceed compressor’s max working pressure to prevent damage to the compressor.
