15
5.3.2 Jacket assembly
Mounting of the side part of the jacket and the rear part of the jacket
1. Remove the jackets from the cardboard cover.
2. Put the consoles 1 (1) and 2 (4) on the thread of the right upper anchor screw and screw them by
means of two nuts M10 (6) and two washers 10,5 (5) - (see Fig. no. 11).
3.
Put the consoles 1 (1) and 2 (4) on the thread of the left upper anchor screw and screw them by means
of two nuts M10 (6) and two washers 10,5 (5) - (see Fig. no. 11).
Fig. No. 11 Assembly of jacket consoles
4. Mount two connecting plugs (2) on the right side part of the jacket (1) and then insert the insulation.
Put the jacket on the lower anchor bolts and connect upper part with consoles 1 and 2 by means of
two screws M5 x12 plus two washers ,3 – see Fig. no. 12.
Fig. No. 12 Right side part of the jacket
1. Console 1 assembly
2. Washer
10,5
3. Nut
M10
4. Console 2 assembly
5. Washer
10,5
6. Nut
M10
1. Side part of the jacket
2. Connecting
plug
