![VIA Technologies VB7009 User Manual Download Page 97](http://html1.mh-extra.com/html/via-technologies/vb7009/vb7009_user-manual_1010981097.webp)
VB7009 User Manual
82
6.30.6.3.
Resume on PS/2 KBC
Resume on PS/2 KBC wakes up a system that has been put into suspend or standby mode. When this
feature is enabled, keyboard activity as defined in the Wake-Up Key feature will cause the system to wake
up. This feature has three options.
S3/S4/S5
The S3/S4/S5 option enables PS/2 keyboard activity to be detected if the system is in S3/S4/S5 power
saving mode.
Disabled
The Disabled option disables the detection of all PS/2 keyboard activity.
6.30.6.4.
Wake-Up Key
The Wake-Up Key feature can only be set when Resume on PS/2 KBC is set to “S3/S4/S5”. Otherwise, this
feature will be not selectable. This feature has two options.
Any Key
The Any Key option enables any key on the keyboard to trigger the Wake-Up event.
Specific Key
The Specific Key option unlocks the Wake-Up Password feature.
6.30.6.5.
Wake-Up Password
The Wake-Up Password feature can only be set when the Wake-Up Key feature is set to “Specific Key”.
This feature enables the user to specify a key sequence that must be entered in order to wake up the
system.
The key sequence can consist of up to 6 alphanumeric characters and some special characters. Function
keys and modifier keys (such as Ctrl, Alt, Del, etc.) cannot be used.
6.30.6.6.
Resume on PS/2 Mouse
Resume on PS/2 Mouse wakes up a system that has been put into suspend or standby mode. When this
feature is enabled, any PS/2 mouse activity that is detected will cause the system to wake up. This feature
has three options.
Note:
This feature supports Erp/Eup provision.
S3
The S3 option enables any PS/2 mouse activity to be detected if the system is in S3 power saving mode.
S3/S4/S5
The S3/S4/S5 option enables any PS/2 mouse activity to be detected if the system is in S3/S4/S5 power
saving mode.
Disabled
The Disabled option disables the detection of all PS/2 mouse activity.
6.30.6.7.
PCI Lan S5 Wakeup
The PCI LAN S5 Wakeup feature enables the BIOS to allow remote wake-up from the S5 power off state
through the PCI bus. This feature has two options: “Enabled” or “Disabled” support PCI Lan S5 Wakeup.
StockCheck.com
Downloaded from StockCheck.com