VB7009 User Manual
12
2.1.5.
Gigabit Ethernet Port
The two integrated 8-pin Gigabit Ethernet ports are using an 8 Position 8 Contact (8P8C) receptacle
connector (commonly referred to as RJ-45). The Gigabit Ethernet ports are controlled by VIA Gigabit
Ethernet controller. The pinout of the Gigabit Ethernet port is shown below.
Figure 10: Gigabit Ethernet port diagram
Table 5: Gigabit Ethernet port pinout
The Gigabit Ethernet port (RJ-45)
has two individual LED indicators located on the front side to show its
Active/Link status and Speed status.
Link LED
(Left LED on RJ-45 connector)
Active LED
(Right LED on RJ-45 connector)
Link Off
Off
Off
Speed_10Mbit
The LED is always On and flashing in
colors Green and Orange
Flash in Yellow color
Speed_100Mbit
The LED is always On in Green color
Flash in Yellow color
Speed_1000Mbit The LED is always On in Orange color
Flash in Yellow color
Table 6: Gigabit Ethernet LED color definition
Pin
Signal
1
Signal pair 1+
2
Signal pair 1-
3
Signal pair 2+
4
Signal pair 3+
5
Signal pair 3-
6
Signal pair 2-
7
Signal pair 4+
8
Signal pair 4-
StockCheck.com
Downloaded from StockCheck.com
