VIA Technologies VB7009 User Manual Download Page 50

Page: 50 / 129

VB7009 User Manual

3.2.2.

COM3 and COM4 Voltage Select Jumper

The voltage for COM3 and COM4 is controlled by the jumper labeled as “J13”. Refer to Figure 33 for the
location of the jumper.

The voltage can be 5V or +12V. +5V is the default setting. The even pin numbers correspond to
COM3. The odd pin numbers correspond to COM4. The jumper settings are shown below.

Figure 33: COM3 and COM4 voltage select jumper diagram

COM4 Setting

Pin 1

Pin 3

Pin 5

+5V (default)

Short Short Open

+12V

Open Short Short

COM3 Setting

Pin 2

Pin 4

Pin 6

+5V (default)

Short Short Open

+12V

Open Short Short

Table 29: COM3 and COM4 voltage select jumper settings

StockCheck.com

Downloaded from StockCheck.com

Summary of Contents for VB7009


































































































































Search results

Summary of Contents for VB7009

Reviews:

Related manuals for VB7009

Brands by name

Popular brands

VIA Technologies VB7009, User Manual

Search results

Summary of Contents for VB7009

Reviews:

Related manuals for VB7009

Brands by name

Popular brands