VIA Technologies NAB-7400, User Manual

Page: 50 / 76

Chapter 3
42
OnChip SATA
Settings: [Enabled, Disabled]
SATA Mode
Serial ATA is the latest generation of the ATA interface. Serial ATA hard
drives deliver transfer speeds of up to 150MB/sec.
Setting Description
IDE Supports two SATA plus two PATA hard disk drives
RAID Only SATA supports RAID
OnChip USB Controller
Settings: [All Disabled, All Enabled, 1&2 USB Port, 2&3 USB Port, 1&3 USB
Port, 1 USB Port, 2 USB Port, 3 USB Port]
OnChip EHCI Controller
Settings: [Enabled, Disabled]
USB Emulation
Set this field to choose the USB emulation. When set to “OFF “, do not
support any USB device on DOS. When set to “KB/MS”, support USB legacy
keyboard and mouse, no support USB storage. And set to ”ON”, support USB
legacy keyboard, mouse and storage.
Settings: [OFF, KB/MS, ON]
Onboard Serial Port 1
Settings: [Disabled, 3F8, 2F8, 3E8, 2E8]
Serial Prot 1 USB IRQ
Settings: [IRQ3, IRQ 4, IRQ 5, IRQ 10, IRQ 11]
Onboard Serial Port 2
Settings: [Disabled, 3F8, 2F8, 3E8, 2E8]
Serial Prot 2 USB IRQ
Settings: [IRQ3, IRQ 4, IRQ 5, IRQ 10, IRQ 11]