VIA Technologies NAB-7400, User Manual

Page: 37 / 76

BIOS Setup
29
IDE D
RIVES
: Move
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
Menu Level
To auto-detect the HDD's
size, head... on this channel
Item Help IDE HDD Auto-Detection [Press Enter]
Access Mode [Auto]
Capacity 0 MB
Cylinder 0
Head 0
Precomp 0
Landing Zone 0
Sector 0
PIO Mode [Auto]
IDE Channel 0 Master [Auto]
Ultra DMA Mode [Auto]
IDE Channel 0 Master
Phoenix - AwardBIOS CMOS Setup Utility
The specifications of your drive must match with the drive table. The hard
disk will not work properly if you enter incorrect information in this category.
Select “Auto” whenever possible. If you select “Manual”, make sure the
information is from your hard disk vendor or system manufacturer. Below is
a table that details required hard drive information when using the “Manual”
mode.
Setting Description
IDE Channel The name of this match the name of the menu.
Settings: [None, Auto, Manual]
Access Mode Settings: [CHS, LBA, Large, Auto]
Capacity Formatted size of the storage device
Cylinder Number of cylinders
Head Number of heads
Precomp Write precompensation
Landing Zone Cylinder location of the landing zone
Sector Number of sectors
PIO Mode Settings: [Auto, 0, 1, 2, 3, 4]
Ultra DMA Mode Settings: [Disabled, Auto]