VIA Technologies KT400A, User Manual

Page: 67 / 88

S-ATA RAID Configuration
Page 5-5
Create Disk Array
1. Use the arrow keys to navigate the main menu. Use the up and down arrow
keys to select the Create Array command and press <Enter> to call out the list
of creation steps.
2. Select Array Mode and press <Enter>, a list of array modes will appear. High-
light the target array mode that you want to create, and press <Enter> to confirm
the selection. If RAID 1 is selected, an option list will popup and enable the
users to select
Create only or Create and duplicate . Create only will allow BIOS
to only create an array. The data on the mirroring drive may be different from
the source drive.
Create and duplicate lets BIOS copy the data from the source
to the mirroring drive.