VIA Technologies KT400A, User Manual

Page: 29 / 88

Installation
Page 3-15
CFP / CIR / CSPK
CFP: Front Panel Connector
Š ŠŠ Š Š HD_LED
This LED will light up whenever the hard drive
is being accessed.
Š ŠŠ Š Š PWR_LED
This connects to the power button of the
system chassis
Š ŠŠ
Š
Š RST
This switch allows you to reboot without
having to power off the system thus prolonging
the life of the power supply or system.
Š ŠŠ Š Š PW_ON
This is connected to the power button on the
case. Using the Soft-Off by Pwr-BTTN feature,
you can choose either Instant Off (turn off
system immediately) or 4 sec delay (push the
button for 4 seconds to turn off the system).
When the system is in 4 sec delay mode,
suspend mode is enabled by pushing the
button momentarily.
CIR: IR connector
Connect your IrDA cable to the IR connector.
1. VCC
4. GND
2. CIRRX 5. IRTX
3. IRRX
CSPK: Speaker
Connect to the system’s speaker for beeping
1. VCC
3. GND
2. NC 4. Speaker