Appendix
B-3
4. If user selects a RAID 0 array in step 2, the block size of the array can also be
selected. Use the arrow key to highlight
Block Size
and press <Enter>, then
select a block size from the popup menu. The block size can be 4KB to 64KB.
5. Use the arrow key to highlight
Start Create Process
and press <Enter>.
A warning message will appear, Press
Y
to finish the creation, or press
N
to
cancel the creation.
6. Important note: All existing content in the hard drive will be destroyed after
array creation.
Delete Disk Array
A RAID can be deleted after it has been created. To delete a RAID, use the
following steps:
1. Select
Delete Array
in the main menu and press <Enter>. The channel column
will be activated.
2. Select the member of an array that is to be deleted and press <Enter>.
A warning message will show up, press Y to delete or press N to cancel.
