BIOS
Page 4-8
Refresh period (Tref)
This filed specifies the number of clock cycles between refresh.
Options: Auto, 15.6us, 7.8us, 3.9us.
AGP & P2P Bridge Control
Scroll to AGP & P2P Bridge Control and press <Enter>. The following screen
appears:
AGP Aperture Size
This item defines the size of the aperture if you use an AGP graphics adapter. It
refers to a section of the PCI memory address range used for graphics memory.
Options: 32M, 64M, 128M, 256M, 1G.
AGP Mode
Chipset AGP Mode support.
Options: 1X, 2X, 4X, 8X.
AGP Driving Control
This item allows you to adjust the AGP driving force. Choose “Manual” to key in
a AGP Driving Value in the next selection. This field is recommended to set in
“
Auto
”
to avoid any error to your system.
Options: Auto, Manual.
AGP Fast Write
Selecting Enabled allows to use Fast Write Protocol for 4X AGP card.
Options: Enabled, Disabled.
AGP 3.0 Calibration cycle
This item allows you to select AGP 3.0 Calibration cycle function.
Options: Enabled, Disabled.
