BIOS
Page 4-26
Note: Overclocking failure will cause no display on monitor. At this instant,
press <
Insert>
key to revert back to the initial or default setting to boot
up your system.
In the following items, “Default Voltage” indicates the original factory value,
and “New Voltage” indicates the value that you assign.
CPU Vcore Voltage
This item allows you to set the CPU Vcore voltage.
Options: Default, 1.350V to 1.550V in 0.025V increment and 1.550V to 1.700V in 0.050V
increment. We recommend that you leave this at the default value.
DIMM Voltage
This item allows you to adjust the DIMM slot voltage.
Options: +0.00V to +0.30V in 0.10V increments. We recommend that you leave this at
the default value.
AGP Voltage
This item allows you to adjust the AGP slot voltage.
Options: +0.00V to +0.30V in 0.10V increments. We recommend that you leave this at
the default value.
4-9 Defaults Menu
Selecting “Defaults” from the main menu shows you two options which are de-
scribed below
Load Fail-Safe Defaults
When you press <Enter> on this item you get a confirmation dialog box:
Load Fail-Safe Defaults (Y/N) ? N
Pressing ‘Y’ loads the BIOS default values for the most stable, minimal-performance
system operations.
Load Optimized Defaults
When you press <Enter> on this item you get a confirmation dialog box:
Load Optimized Defaults (Y/N) ? N
Pressing ‘Y’ loads the default values that are factory settings for optimal perfor-
mance system operations.
