manualshive.com logo in svg

VIA Technologies K8T800, User Manual

Share
Download
VIA Technologies K8T800 User Manual Download Page 55

BIOS

Page 4-19

Off:

The system stays off after a power failure.

Former-Sts:

The system returns to the state it was in just prior to the power
failure.

 

IRQ/Event Activity Detect

Scroll to IRQ/Event Activity Detect and press <Enter>. The following screen appears:

PS2KB Wakeup Select

This item allows you to select Hot Key or Password to wake-up the system by PS2
Keyboard. If Password is selected, press <Enter> key to change a password with
max 8 numbers.
Options: Hot key, Password.

PS2KB Wakeup form S3/S4/S5

This item allows you to set a Hot Key to wake-up the system by PS2 Keyboard.
Options: Disabled, Ctrl+F1, Ctrl+F2, Ctrl+F3, Ctrl+F4, Ctrl+F5, Ctrl+F6, Ctrl+F7, Ctrl+F8,
Ctrl+F9, Ctrl+F10, Ctrl+F11, Ctrl+F12, Power, Wake, Any key.
Note: Power and Wake are Windows98 Keyboard button.

PS2MS Wakeup form S3/S4/S5

This item allows you to wake-up the system by PS2 Mouse.
Options: Enabled, Disabled.

USB Resume from S3

This item allows a USB device to wake-up the system from S3 suspend state.
Options: Enabled, Disabled.

PowerOn by PCI Card

An input signal from PME on the PCI card awakens the system from soft-off state.
Options: Enabled, Disabled.

Summary of Contents for K8T800

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands