VIA Technologies EPIA-NL, User Manual

Page: 42 / 79

Chapter 3
34
A
DVANCED
C
HIPSET
F
EATURES
: Move
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
Menu Level
If there are display cards on
both AGP and PCI slots,
configure this item for BIOS to
select which one to boot
Item Help [PCI Slot] Display Card Priority
AGP & P2P Bridge Control
[Press Enter]
CPU & PCI Bus Control [Press Enter]
Select Display Device [CRT]
Panel Type [1024x768 : 1 :On]
HDTV Display Disabled
TV H/W Layout [Default]
TV Type [NTSC]
TV Output Connector [Press Enter]
Advanced Chipset Features
Phoenix - AwardBIOS CMOS Setup Utility
HDTV Type HDTV 720P
HDTV Input Mode RGB Input
Caution:
The Advanced Chipset Features menu is used for optimizing the chipset
functions. Do not change these settings unless you are familiar with the
chipset.
Display Card Priority
This setting specifies which VGA card is your primary graphics adapter.
Settings: [PCI Slot and AGP]
Select Display Device
This setting refers to the type of display being used with the system.
Settings: [CRT, LCD, CRT + LCD, TV, CRT + TV, LCD + TV, DVI, CRT + DVI,
TV + DVI]
Panel Type
This setting refers to the native resolution of the display being used with the
system. (i.e.: Resolution : Channel : Dithering)
Settings: [640x480:1:On, 800x600:1:On, 1024x768:1:On, 1280x768:1:On,
1280x1024:2:On, 1400x1050:2:On, 1600x1200:2:On, 1280x800:1:On,