EPIA-E900 User Manual
38
5.4.
Installing into a Chassis
The EPIA-E900 can be fitted into any chassis that has the mounting holes compatible with the standard
Pico-ITXe mounting hole locations. Additionally, the chassis must meet the minimum height requirements
for specified areas of the mainboard.
5.4.1.
Suggested minimum chassis dimensions
The figure below shows the suggested minimum space requirements that a chassis should have in order to
work well with the EPIA-E900.
Figure 43: Suggested minimum chassis dimensions
Each side of the mainboard should have a buffer zone from the internal wall of the chassis. The two sides
of the mainboard that accommodates the I/O coastline should have a buffer of 1.00mm. The two sides
adjacent to the I/O coastline should have at least a 5.00mm buffer.
For the side that is close to the MXM connector, the buffer should be at least 152mm if the E900-A
expansion card will be used.
Note:
The E900-A expansion card is for project based enquiries only. Please contact sales for detailed information.
Summary of Contents for EPIA-E900-12Q
Page 1: ...1 01 02162017 111600 USER MANUAL EPIA E900 Pico ITXe board...
Page 75: ......
