EPIA-E900 User Manual
13
2.1.5.
Gigabit Ethernet Port
The EPIA-E900 is equipped with two Gigabit Ethernet ports. The Gigabit Ethernet ports uses 8 Position 8
Contact (8P8C) receptacle connector or commonly referred to as RJ-45. It is fully compliant with IEEE
802.3 (10BASE-T), 802.3u (100BASE-TX), and 802.3ab (1000BASE-T) standards.
Figure 14: Gigabit Ethernet port diagram
Pin
Signal
1
Signal pair 1+
2
Signal pair 1-
3
Signal pair 2+
4
Signal pair 3+
5
Signal pair 3-
6
Signal pair 2-
7
Signal pair 4+
8
Signal pair 4-
Table 6: Gigabit Ethernet port pinout
The Gigabit Ethernet port has two individual LED indicators located on the front side to show its
Active/Link status and Speed status.
Link LED
(Left LED on RJ-45 connector)
Active LED
(Right LED on RJ-45 connector)
Link Off
Off
Off
Speed_10Mbit
Off
Flash in Yellow color
Speed_100Mbit
The LED is always On in Green color
Flash in Yellow color
Speed_1000Mbit
The LED is always On in Orange color
Flash in Yellow color
Table 7: Gigabit Ethernet LED color definition
Summary of Contents for EPIA-E900-12Q
Page 1: ...1 01 02162017 111600 USER MANUAL EPIA E900 Pico ITXe board...
Page 75: ......
