Chapter 2
16
C
ONNECTORS
Hard Disk Connectors: IDE1 & IDE2
The mainboard has a 32-bit Enhanced IDE and Ultra DMA 133/100 controller
that provides PIO mode 0~4, Bus Master, and Ultra DMA 133/100 functions.
You can connect up to four hard disk drives, CD-ROM and other devices.
The primary hard drive should always be connected to IDE1 as the master
drive. Both IDE drives can connect to a master and a slave drive.
1
IDE1-2
If two drives are connected to a single cable, the jumper on the second drive
must be set to slave mode. Refer to the drive documentation supplied by the
vendor for the jumper settings.
