Chapter 3
48
USB Resume from S3
Enables activity detected from USB devices to restore the system from a
suspended state to an active state.
Settings: [Disabled, Enabled]
VGA Event
Enables the power management unit to monitor VGA activities.
Settings: [Off, On]
COM Event
Decide whether or not the power management unit should monitor serial port
(COM) activities.
Settings: [None, COM]
HDD Event
Enables the power management unit to monitor hard disk activities.
Settings: [Off, On]
PCI Master Event
Enables the power management unit to monitor PCI master activities.
Settings: [Off, On]
PowerOn by PCI Card
Enables activity detected from any PCI card to power up the system or
resume from a suspended state. Such PCI cards include LAN card, onboard
LAN controller, onboard USB ports, etc.
Settings: [Disabled, Enabled]
Modem Ring Resume
Enables any Wake-on LAN or Ring-In signals from the Ethernet or modem to
restore the system from a suspended state to an active state.
Settings: [Disabled, Enabled]
