VIA Technologies AMOS-5002 User Manual Download Page 70

Page: 70 / 81

AMOS

AMOS-

-5002

5002

5002 User Manual

User Manual

View Only

The View Only option only allows access to view the BIOS settings. Users

with this permission level cannot make changes to the BIOS.

Limited

The Limited option only allows non-critical BIOS settings to be changed.

Changes are allowed to the following BIOS features:

System Time

System Date

Quick Boot

Display Logo

Full Access

The Full Access option allows all BIOS settings to be changed except for the

Change Supervisor Password and User Access Level options.

5.7.3.

Change User Password

This option is for setting a password for non-supervisors. When a user

password is set, the

Clear User Password

and

Password Check

options will be

unlocked.

5.7.4.

Clear User Password

This option is only available when the user accesses the BIOS Setup Utility

when the user password has been specified.

5.7.5.

Password Check

This feature is compulsory when the

Change Supervisor Password

option is set.

The user will have up to three chances to enter the correct password before

the BIOS forces the system to stop booting. If the user does not enter the

correct password, the keyboard will also lock up. The only way to get past

this is to do a hard reboot (i.e., use the system reset button or cut off the

Summary of Contents for AMOS-5002


















































































Search results

Summary of Contents for AMOS-5002

Reviews:

Related manuals for AMOS-5002

Brands by name

Popular brands

VIA Technologies AMOS-5002, User Manual

Search results

Summary of Contents for AMOS-5002

Reviews:

Related manuals for AMOS-5002

Brands by name

Popular brands