EN
XCLEAR IMMERSION UV-C MANUAL |
7
NEN-EN-IEC 60335-1:2010 CLAUSE 27.1
Device for earthing. The aforementioned clause is applicable unless:
• The water is insulated from live parts by double insulation, and the inlet and outlet pipes of
class I appliances either
• contain a metal sieve reliably connected to the earthing terminal; or
• are of metal and permanently and reliably connected to the earthing terminal. The
other accessible metal parts of the appliance in contact with the water shall also be
permanently and reliably connected to the earthing terminal.
NB. (NEN-EN-IEC 60335-1:2010 CLAUSE 27)
27.4 If the base of the earth connection is part of an aluminium or aluminium-alloy frame or
enclosure, precautions must be taken to prevent the risk of corrosion due to contact between
copper and aluminium or its alloys.
SAFETY
Attention!
Take care that the lamp is always completely below the water level. If the
lamp dries out it will overheat and stop working.
If maintenance or repair work is to be carried out, the appliance must be switched off using the
stipulated method (
NEN-EN-IEC 60335-2-109:2010 clause 22.102
), and you must always wear
safety goggles (drawing 1, item A) and latex gloves (drawing 1, item B). It is also recommended
that you carefully read through the safety regulations. This UV-C appliance is also suitable for
saltwater applications. The appliance must always be rinsed with clean water, however, after
being removed from saltwater or chlorinated water.
• This appliance contains a UV-C lamp.
• Never switch the UV-C lamp on if it is not inside a UV-C shielding enclosure that is part of
the appliance to be assembled, especially if there is a chance of contact with the eyes and/
or skin.
• Use of the appliance in a manner other than that for which it is intended or damage to the
UV-C shielding enclosure may cause the release of hazardous UV-C radiation. Even small
doses of UV-C radiation can cause damage to the eyes and/or skin.
• Damaged appliances may not be put into operation.
• Always read the maintenance instructions before opening the appliance.
• The appliance’s power supply must be fitted with a 30mA earth leakage current circuit-
breaker.
• Always de-energize the appliance before carrying out any maintenance or repair work on it.
• Never do work on the appliance while standing in a puddle of water or with wet hands.
• This appliance is not intended for household use or installation by persons (including
children) with reduced physical, sensory or mental capabilities, or a lack of experience and
know-how. Keep children away from this appliance and from the cable. The Immersion
Summary of Contents for Xclear IMMERSION UV-C 40W AMALGAM
Page 2: ......
Page 5: ...XCLEAR IMMERSION UV C MANUAL 5 I J F C G B A H E D 2 1...
