Quick Start Guide of PRO-NVR-Smart
23
5. If the added device is an automatic number plate recognition (ANPR) camera, you can
check
Added as Automatic Number Plate Recognition Unit
checkbox.
Note:
Up to four cameras can be added as ANPR unit for viewing the license plate and
vehicle information recognized by the camera via Control Client (for details, refer to
User Manual of NVR Control Client
).
6. Set the
Add Camera to Area
switch as ON to export the camera to an area. You can
create a new area by the device name, select an existing area, or customize a new
area.
After adding cameras to area, you can check
Synchronize Camera Name
checkbox
to get the camera name from the device, select
Recording Schedule Template
to set
the recording schedule for the device and the recording task will automatically perform
according to schedule.
Note:
If you do not export cameras to area, you cannot perform the live view, playback,
event settings, etc., for the cameras.
7. Click
Add
to add the device and back to the device list page. You can also click
Add
and Continue
to save the settings and continue to add other devices.
Adding the Camera via PoE Interface
For NVR, PoE interfaces are available for enabling the NVR to pass electrical power
safely, along with data, on Ethernet cabling to the connected network cameras.
Warnings
PoE ports do not comply with Limited Power Source. The additional equipment connected
to PoE ports shall have fire enclosure.
Notes:
The camera to be connected via PoE interface should support PoE function.
If the PoE camera to be added is active, you must change the password of the
camera’s admin user to that of NVR’s admin user before connecting the camera to
the NVR.
If the PoE camera to be added is inactive, NVR will automatically activate it and set
the camera admin user
’s password as the NVR admin user’s password.
Steps:
1. Use the PoE interface on the rear panel and a network cable with RJ-45 connectors
to connect the network camera to NVR.
2. On the device list, the cameras are added automatically.
Note:
If it is not added or you delete the camera from the device list manually, unplug
the camera and reconnect the camera to the NVR via PoE interface after two minutes
to add the camera.
Local Storage
You can manage the connected HDDs and network disks (iSCSI) of NVR and allocate the
storage space to the added cameras for video and picture storage.
Note:
You must restart Recording Server via NVR
’ Windows Task Manager (Services tab)
after adding the local hard disk or network disk (iSCSI).
Steps:
Summary of Contents for PRO-NVR-Smart
Page 1: ...Quick Start Guide...
