Quick Start Guide of PRO-NVR-Smart
15
Note:
If the following dialog pops up, click
Cancel
to continue.
3. Check the status of the disk. If the newly installed disk status is not
Unallocated
,
perform the following steps to make it work properly.
Notes:
Disk 0 is the built-in disk and must not be edited. Disk 1(2, 3, or 4) is the installed
hard disk.
If the installed disk status is Unallocated, reboot the NVR and login again via the
Web Client. If it still does not work, please contact our technical support
engineers.
4. Right-click the disk and select
Mark Partition as Active
in the right-click menu to
mark the disk as active.
Summary of Contents for PRO-NVR-Smart
Page 1: ...Quick Start Guide...
