i
ABOUT THIS GUIDE
This guide contains instructions for configuring and installing the mainboard.
•
Chapter 1, Introduction, acquaints user with the special features of the mainboard.
•
Chapter 2, Hardware Configuration, gives information on configuring memory and setting the
mainboard's jumpers. Brief sections on installing memory.
•
Chapter 3, Mainboard Installation, is an overview of how to install the mainboard in a system.
•
Chapter 4, BIOS Setup, provides the BIOS information for system configuration.
•
Chapter 5, BIOS POST Messages, provides references for all POST error messages.
•
Chapter 6, BIOS Default Drive Table, provides a Default Drive Disk table contained in Setup.
WARNING
For the system to operate normally please make sure JP38 of the mainboard is set as below. Refer to Fig 2 in
this manual for the location JP38.
If JP38 is open, no CMOS data can be retained.
The information presented in this publication has been carefully checked for reliability; however, no
responsibility is assumed for inaccuracies, whereas, specification is subjected to change without notice.
All rights reserved. No part of this Manual may be reproduced in any form without the written permission.
