9
OPERATION (CONTINUED)
Turn the Mi4002 on by pressing the
Power button; “AUX” or the AM/FM
frequency will appear in the display.
1
1
1
If “AUX” appears, press the RADIO/AUX
IN button
1
to select AM/FM. Then press
the BAND button
2
repeatedly to select
the desired band (AM or FM).
NOTE:
If an FM station is broadcasting in
stereo, “FM ST” will appear in the display.
2
1
2
Repeatedly press the TUNE
Up/Down/Skip
n
/
o
buttons to manually
advance the frequency in the display up
or down until the desired frequency
appears.
For auto tuning, press
and hold
the
TUNE Up/Down/Skip
n
/
o
buttons until
the frequency in the display starts to scan
and then release; the tuner will search
and then stop on the next strong station it
finds. Repeat this step until the desired
frequency appears in the display.
NOTE:
When a station is tuned, after five
seconds, the radio frequency will
disappear and the actual time will
reappear in the display. If you press the
DISPLAY button, the radio frequency will
appear for five seconds in the display
again.
1
1
3
Adjust the volume as desired by
pressing the Volume Up/Down
buttons.
1
1
4
USING THE RADIO
Antennas
FM: Unravel and extend the FM wire antenna for best reception.
AM: Turn the unit for better AM reception.
