7
INSERTING AN IPOD
®
Locate the correct iPod
®
Adapter to use
as shown on pages 16-17. Insert the
adapter into the cavity (as shown),
making sure the tabs are facing front,
and slip the tabs into place.
1
Press the rear side of the adapter until it
is positioned inside the cavity.
NOTE:
To remove the adapter, insert
your finger (or other object) into the
adapter, then gently pull the adapter out
to remove it.
2
If using the dock
: Insert the iPod
®
onto
the dock. Gently push down so the
connector on the iPod
®
slides onto the
connector on the Mi4002. If the Mi4002 is
turned off, once you connect the iPod
®
, it
will start charging the battery until it is full.
If the Mi4002 is turned on and in
AM/FM/AUX IN mode, once the iPod
®
is
connected, press the iPod
®
button to
switch to iPod
®
mode and then playback
will begin automatically. Then, if you
disconnect the iPod
®
, the Mi4002 will stay
in iPod
®
mode until manually switched to
AM/FM/AUX IN mode. When the iPod
®
is
connected to the Mi4002, it will be in the
Pause mode.
1
3
If using the AUX IN jack
: Insert an
audio cable (not included) into the AUX
OUT jack on your player and the other
end into the AUX IN jack on the rear of
the Mi4002. Press the POWER button
to turn this unit on, then press the
RADIO/AUX IN button to select the AUX
IN mode. The external player’s output
sound will be heard through the
Mi4002's speakers. If you disconnect
the external unit from the AUX IN jack,
the Mi4002 will stay in AUX IN mode
until manually switched to AM/FM/iPod
®
mode.
4
NOTES:
•
CHARGING:
When the iPod
®
is inserted into the dock, whether the Mi4002
is on or off, the iPod’s
®
battery will charge until it is full.
•
CHANGING THE MODE:
If units are connected to the dock AND the AUX IN
jack, you can press the iPod
®
button to select iPod
®
(dock) or the
RADIO/AUX IN button to select AUX IN. To turn off the unit, press the
POWER button.
