2)Functional operation
① cleaning function
In the standby status, press the "cleaning" button, the stirring motor starts, the
corresponding "stirring" icon lights up, the stirring animation icon rotates, press the
"cleaning" button again, the stirring motor stops,the corresponding "stirring" icon
will be extinguished, and the stirring animation icon will be extinguished.
②automatic function
In the standby status, press the "refrigeration" button, “refrigeration”and "stirring"
icon lights up, “refrigeration” and "stirring" animation icon rotates, start the stirring
motor and balance solenoid valve, and start the main press for a 3 seconds delay,
stop balance solenoid valve, when the hardness value reaches 99, stop the main
press, start the balance solenoid valve, stop the stirring motor by setting value of 5
seconds delay, enter the waiting state, when the waiting time reaches the set
number of minutes of the machine cycle restart time, start the stirring motor and
balance solenoid valve, and start the main press for a 3 seconds delay, stop balance
solenoid valve, and the cycle continues.The pre-cooling of the material trough is
controlled by temperature setting value. When the temperature reaches or falls
below the pre-cooling temperature setting value of material trough, stop the
pre-cooling press; when the temperature of material trough rises back to the
pre-cooling temperature setting value of material 2 degrees, start the
pre-cooling press. Press the "refrigeration" button again and return to standby status.
The corresponding "refrigeration" and "stirring" icons will be extinguished. The
"refrigeration" and "stirring" animation icons will be extinguished
③
Overnight fresh-keeping function
Press the "Fresh-keeping" button, “refrigeration” and “stirring” icons light up,
“refrigeration” and “stirring”animation icons flash, the pre-cooling of material
cylinder and material trough are controlled by temperature. When the temperature
of the material cylinder is higher than the set tempe 2 degrees, the stirring
motor starts, the balance valve starts, the delay main press starts, and the balance
valve stops. When the material cylinder temperature reaches the set temperature,
stop the main press, stop the stirring motor, start the balance valve and stop the
balance valve for a 5 seconds delay. the pre-cooling of the material trough is
controlled by the temperature setting value, when the temperature reaches or falls
below the pre-cooling temperature setting value of the material trough, stop the
pre-cooling press, when the temperature of the material trough rises back to the
pre-cooling temperature setting value + 2 degrees of the material trough, start the
pre-cooling press. When the above material trough and cylinder reach the
temperature, it must be guaranteed that it can only enter the cooling state again with
the interval of 7 minutes. Press the "overnight" button again and return to standby
status, the corresponding "refrigeration" and "stirring" icons will be extinguished,
and the "refrigeration" and "stirring" animation icons will be extinguished.
④
Parameter setting
In the standby status, long press the setting button for 10 seconds, and enter the
setting status of parameter. The digital tube in the voltage display area shows P*, the
current value of the parameters are shown in the display area of the number of the
ice-cream, and the setting button is short pressed to switch the parameters. The
corresponding parameter values are adjusted by pressing add-substract button.
⑤
Zero clearing setting of the number of the cups.
In the parameter setting status, long press "add" and "subtract" button for 5
seconds at the same time, clear the number of cups and return to standby status
Automatically.
⑥
Processing of alarm for lack of material
In the state of refrigeration and overnight fresh-keeping, the alarm for lack of
material flashes
"CL" in the voltage display area and buzzes (stop after buzzing for 20 seconds, and
the display continues). It returns to standby state automatically when the set value of
shutdown time for lack of material is reached.
Summary of Contents for ZM-A168
Page 1: ...ICE CREAM MACHINE MANUAL...
