05
Lights off
Lights off
Lights off
Lights off
/
Lights off
Blinks
3 times
every 2
seconds
Blinks
4 times
every 2
seconds
Blinks
5 times
every 2
seconds
Blinks
6 times
every 2
seconds.
Lights on
Blinks 8
times
every 2
seconds
Overvoltage
Leakage
Overcurrent
Power Plug /
Circuit board
Over-heat
PE wire is
not connected
to ground
Power-on
Self-test
failed
When the voltage is no lower
than 270V±10V for 0.1 second,
the power output will be
stopped. When the voltage
drops to 254V±10V, charging
will start again after a 5-second
delay. "
When the leakage current is no
lower than 25±5mA, the relay
will be "off" (the response time
is <100mS). When the failure is
eliminated, the charger must be
powered on again to continue
charging.
1. When the current is more
than the "Stage1 Fixed
Overcurrent Value" but no more
than the "Stage2 Fixed
Overcurrent Value" for 5
seconds, the relay will be "off";
after 10 seconds, the relay will
be "on" again. If this overcurrent
situation occurs again, the relay
will be "off" again. After 3 times
of repeats, the failure light will
be on, and the charging is over.
The charger must be
re-powered on to continue
charging. "2. When the current
is greater than the "Stage2
Fixed Overcurrent Value" for 1
second, the relay will be "off",
the failure light will be on, and
charging will be over. It must be
powered on again to continue
charging. "
When the temperature of the
power plug or circuit board is
more than 85℃ for 2 seconds,
the relay will be "off". It must
wait for the temperature to
drop below 65℃ for 2 seconds
to return to normal working.
Charging is allowed, but the
warning light will be "red" (no
blinking) all the time.
If the charger is faulty, the
relay will be "off" and the
charger will report the need
for repair.
