04
Troubleshooting
Blinks once
Keeps
blinking
fastly
Keeps
blinking
slowly and
regularly
Lights on
Lights off
Lights off
LED Light 1
(Green)
Blinks once
Lights off
Lights off
Lights off
Blinks once
every 2
seconds
Blinks twice
every 2
seconds
LED Light 2
(Red)
Initial Status
To Be
Connected
Normal
Charging
End of
Charging
Abnormal
Communication
Undervoltage
Functions
Power on or reset. The relay
is "off".
The voltage of Detection Point 1
is 12V, and the relay is “off”.
The voltage of Detection Point 1
is 6V, and the relay is “on”.
The voltage of Detection Point 1
is 9V, and the relay is “off”.
The voltage of Detection Point 1
is abnormal (that is, the voltage
value is not one of the following
values: [6±0.8]V, [9±0.8]V,
[12±0.8]V), the charger enters
the protection status. When the
voltage at Detection Point 1 is
back to normal, the charger will
return to its normal working
state.
When the voltage is no more
than 75V±10V for 0.1 second,
the power output will be
stopped. When the voltage rises
to 90V±10V, the charging system
will start again after a 5-second
delay.
Definition
Stop Charging
1. Disconnect the Type 1 plug from the vehicle inlet
（
Figure 4
）
.
2. Disconnect the power plug from the outlet
（
Figure 5
）
.
3. Replace the charger plug dust cap and store the charger unit in the bag
provided, in a dry place
（
Figure 6
）
.
5
4
6
