Battery charger / inverter COMBI-GAMMA
090138.02
71
U1-11: Elapsed Time
Use constant U1-11 to monitor the elapsed running hours after power ON (O2-03=0) or
•
after RUN (O2-03=1).
U1-12: Battery Temperature Sensor
Use constant U1-12 to monitor the temperature that has been detected by the Battery
•
Temperature Sensor (BTS-3) in unit of 1°C.
U1-13: CPU ID1
Use constant U1-13 to check the software version 1.
•
U1-14: CPU ID2
Use constant U1-14 to check the software version 2.
•
U1-15: Solar Charger Status
Use constant U1-15 to monitor the solar charger status after the solar module is con-
•
nected to the extension port (Port C).
U1-16: Solar Supply Current
Use constant U1-16 to monitor the solar supply current value in units of 0.1A.
•
U1-17: Solar Supply Power
Use constant U1-17 to monitor the solar supply power value in units of 1W.
•
U1-18: Solar Amp-Hours
Use constant U1-18 to monitor the solar Amp-Hours value in units of 1Ah.
•
U1-19: Solar Total Amp-Hours
Use constant U1-19 to monitor the solar total Amp-Hours value in units of 1Ah.
•
U2 Group (Fault Trace)
U2-01: Current Fault
Use constant U2-01 to monitor the current fault that results in “Combi-Gamma” stopping
•
operating.
U2-02: Last Fault
Use constant U2-02 to monitor the last fault that has been recorded.
•
U2-03: AC IN Voltage
Use constant U2-03 to monitor the AC input voltage value in units of 0.1V when the cur-
•
rent fault occurs.
