ENG
19
UPPER/ LOWER DISPLAYS DEFINITIONS
RT
ACTUAL RIDE TIME IN THE TRIP
TT
TOTAL ELAPSED TRIP TIME
FORM START TO FINISH
HOW TO START THE TIMERS?
●
If the timers have been reset to “0:00:00”, they will start automatically when the wheel rotates. (see
HOW TO RESET THE TIMERS TO “0:00:00” below)
●
If RT/TT timers had been stopped manually, and both of the RT/TT timers were not reset to zero,
they must be restarted manually by pressing
3
in RT/TT Mode.
Important
TT timer must be active in order for the RT timer to accumulate Ride Time and for
computer to calculate current ride.
HOW TO STOP?
●
When the wheels stop, RT timer will pause, but TT timer will keep running to record the total
elapsed trip time.
●
OR stop both of the RT/TT timers manually by pressing
3
in RT/TT Mode at the end of ride.
HOW TO RESET THE TIMERS TO “0:00:00”?
●
Press
3
for 2 seconds in any Primary Screen Mode except STP/IDS, with the RT/TT timers turned off.
Tip:
If the bike is in motion and Button
3
is held down in the RT/TT Mode with the timers deactivated,
the ride timers reset to
0:00:00.
When Button
3
is released, both RT and TT will start with the next
wheel input. This is a good way to begin timing a race or training ride with a rolling start.
