VETRON 5000, Instruction Manual

Page: 10 / 83

08
07/2020
VETRON 5000/5100 - FLAT BED MACHINE - INSTRUCTION BOOK
1-/ 2-NEEDLE LOCKSTITCH SEWING MACHINE WITH DIRECT DRIVE
AND TRIPLE FEED
The consistent use of state-of-the-art control technology has made it possible to program all ma-
chine parameters programmatically, making them directly accessible. This ensures that the process
parameters are free from operator influence and after each setup.
The innovative dynamic machine parameters based on the current speed and the permanent materi-
al thickness measurement open up new paths in terms of processing quality, process reliability and
reducing cycle times.
Typical applications:
Automotive Upholstery Suitcase Bag
INTENDED USE
Any use not approved by the manufacturer is considered improper!
Proper use also includes compliance with the prescribed operating, adjustment,
maintenance and repair measures. Damage due to non-intended use is not covered by
the manufacturer‘s liability!
The VETRON 5000/5100 and its subclasses are 1- and 2- needle lockstitch sewing machine with
direct drive and triple feed. Use the machines only according to their technical data and for medium
to heavy materials such as jeans, leather, etc.. No tin! The machine is only intended for processing
dry material and must not contain any hard objects. In this respect, the seam must be made with a
thread whose requirement profile corresponds to the application purpose.
The machine is designed for industrial use.
The operator is obliged to carry out a risk assessment in accordance with the Work Protection Act
(ArbSchG).
CE-CONFORMITY DECLARATION
All VETRON sewing machines comply with the applicable European regulations of relevant basic
health and safety requirements, which are specified in the declaration of conformity and manufac-
turer.
01. PREFACE
04. PRODUCT INTRODUCTION / INTENDED USE / CONFORMITY DECLARATION