14. RS 232 PARAMETERS
External devices connected to RS 232C have to be supplied from the
same mains and common electric shock protection. It prevents from
appearing a potential difference between zero leads of the two devices.
This notice does not apply to the devices that do not use zero leads.
Transmission parameters:
x
Baud rate - 2400 – 38400 bit / s
x
Data bits - 7,8
x
Stop bits - 1,2
x
Parity control - no, even, odd
There are four ways of sending data via RS232 interface:
x
Manually
– after pressing
,
x
Automatically
– after stabilizing the indication over -
LO-
threshold
x
Continuously
– after it is activated in parameter or by a command
sent via RS232
x
On external request
- see - „List of scale - computer commands”.
The indication can be sent as:
x
stable –
the indication is sent after the scale stabilizes.
x
any
– the indication is sent immediately after pressing the
key,
this state is assign with
<?>
in the printout.
14.1. Printout type
This parameter is to select the type of printout.
Procedure:
x
Enter the submenu
<P2.Prnt>
and then:
- 25 -
Summary of Contents for WLC 0
Page 2: ... 2 JANUARY 2009 ...
Page 8: ...Scales WLC C1 R Scales WLC C2 R Scales WLC C1 K Scales WLC C2 K 8 ...
Page 75: ... 75 ...
