SAFETY PRECAUTIONS
All safety messages are identified by the following the words "
WARNING
" and
"CAUTION". These words mean the following:
△
WARNING
Important information to alert you to a
situation that might cause serious injury and
damage to your property if instructions are
not followed.
△
CAUTION
Important information that tells how to prevent
damage to equipment.
When using the scale/balance, the following safety precautions should always be
followed.
△
WARNING
Use only the AC adaptor with the scale/balance. Other adaptor may cause
damage. (AC adaptor is optional)
△
CAUTION
Avoid installing the scale/balance in direct sunlight, this may cause discoloration or
malfunctions.
Do not mix the type of batteries. Replace all other batteries at the same time.
If the scale/balance is not to be used for a long period of time, remove all batteries
from the battery compartment to avoid leakage which may cause damage to the
instrument.
Avoid overloading that could cause damage to the scale/balance.
Do not drop water in the scale/balance that is not water-resistant. It causes damage,
if inside of the scale/balance is wet.
Matter charged static electricity could influence the weighing. Discharge the static
electricity. As example, the method is to use the electrification prevention spray, to
spray it to both side of weighing platform.
1
SPECIFICATIONS
Model number
Capacity
Division
FR-H
-100
100g
0.001g/0.005g
FR-H
-200
200g
0.005g
FR-H
-300
300g
0.005g/0.01g
FR-H
-600
600g
0.01g/0.005g
FR-H
-1000
1000g
0.01g/0.02g
FR-H
-3000
3000g
0.05g/0.1g
FR-H
-6000
6000g
0.1g/0.2g
FR-H
-10000
10000g
0.2g/0.5g/1g
Platter
φ
115mm or 170 x 180mm
Net/gross weight
1350/1500g
Package
Standard carton: 34
×
22
×
14(cm
3
)
6 Units in one box:
47.5
×
38.5
×
45(cm
3
)
Operating Temperature
0-40
℃
(32-104
℉
)
Power source
Batteries or AC/DC
Adapter 9V/100mA (optional)
Counting procedures
1.Press [ON/OFF] to turn on the scale.
Wait for "0" to appear on the display.
2.Start the Count Procedure
If necessary, press
[ZERO]
key to set the display to “0”.
3.
Press the
[PCS]
key to put the scale in PCS mode. ,the display will show P=X
X ,press UNIT to select XX value (10 20 50 100),Place a given number of samples
of an item on the pan (the Sample Size should be either 10
、
20
、
50 or 100 pieces).
The weight of these samples will show on the display.
4.
Press the
[PCS]
key, the display will show “XX pcs”, then the scale will recall the
sample size you selected and show the starting sample size on the display (you can
now remove the samples if you want to return the scale to 0)
5.
Press the
[PCS]
key to return to the weighing mode
6