1. Thank you for purchasing a V-link dynamometer
The V-LINK dynamometer from Vetec A/S is designed with the purpose to increase efficiency and
accuracy in all situations, including harsh and humid environments.
The development has been focused on optimizing features that make it easy for the operator to
handle and operate the dynamometer and still achieve stable and accurate measurements. The
increased ease of use is achieved, for example, by a flat design, simple menu structure, quick guide
and fast charging with standard USB charger.
Achieving an IP67 class has been especially important in order to accommodate customers
working in wet and humid environments. To test the functionality, the dynamometer has been
immersed in 1 meter deep water for half an hour. The result was a fully functional product.
V-LINK is designed and manufactured in Denmark for high quality assurance and the service
department provides professional support, repair and calibration service.
© Vetec A/S
Teknikvej 69
DK-5260 Odense S
Tlf.: +45 65919802
www.vetec.dk
1.1 Important information
READ ALL INSTRUCTIONS AND WARNINGS CAREFULLY BEFORE INSTALLATION AND USE.
These instructions have been published by Vetec A/S and are not subject to any guarantee.
The instructions may be withdrawn or revised by Vetec A/S at any time and without further notice.
Corrections and additions will be added to the latest version of the instructions.
Carefully read through the safety instructions in this user manual and follow the installation and
operating procedures and requirements. Failure to follow these warnings could result in serious injury
and property damage.
Every use should be carried out according to current regulations in the country of use. Vetec A/S is
not responsible for local regulations not being followed.
Visit Vetec’s YouTube channel to watch tutorials
demonstrating the installation, daily use and menu
setup.
1.2 YouTube video tutorials
- 1 -
