Rev. 4/17/2015
PLBS, MANUAL.doc
Copyright 2014 Vestil Manufacturing Corp.
Page 3 of 5
FIG. 1: PLBS exploded parts diagram and bill of materials
Use instructions:
To lift an object with the pry bar:
1. Slide the nose plate under the object. If necessary apply
steady pressure to the foot lever to push the plate under
the object; then
2. Carefully pull down the end of the handle. Make sure
that the nose plate does not slip out from under the
object.
Inspections & Maintenance:
perform the inspections explained below and maintain the pry bar as described
to ensure that the unit is and remains in normal, safe operating condition.
If a problem is discovered during an inspection, restore the unit to normal operating condition
BEFORE using it again.
Inspections:
Before each use, including first use, inspect:
1. Handle and nose plate: look for regions of significant wear, cracks, cracked welds, deformity, corrosion, & rust.
2. Wheels and mounting hardware: roll the pry bar to confirm that the wheels and bearings are in normal
condition. Examine the axle pin, machine bushing and cotter pin. The axle pin should be straight and
undamaged. The bushing should be undamaged and allow the wheel it contacts to turn smoothly without
contacting the cotter pin. The cotter pin should be undamaged and securely attached to the axle pin.
3. Product labels: all labels should be readable and located as shown in the “Label placement diagram” on p. 4. If
a label(s) is unreadable or missing, contact Vestil to order a replacement.
Item
no.
Part no.
Description
Quantity
1
33-514-004
33-514-005
33-514-006
Frame weldment
PLBS-5
PLBS-6
PLBS-7
1
1
1
2
16-132-020-001 5in. x 2in. poly on steel wheel, roller
bearing, for
3
/
4
in. axle
2
3 33-112-013
Axle
pin
1
4 33424
3
/
4
in. NR 18ga. machine bushing
1
5 65078
1
/
8
in. x 1
1
/
2
in. zinc-plated cotter pin
1
6 13-025-015
Handle
grip
1
*
13-154-006
Replacement parts: complete wheel kit
Foot lever
