Rev. 4/17/2015
PLBS, MANUAL.doc
Copyright 2014 Vestil Manufacturing Corp.
Page 4 of 5
Maintenance:
DO NOT use the unit if repairs are incomplete! While servicing the pry bar, DO NOT modify it in any way.
A “modification” is a change that alters the product from original condition, like bending the structural members or
removing a part or several parts. Modifications might make the device unsafe to use and
automatically
void the limited
warranty.
Proper use, maintenance, and storage are essential for this product to function properly.
Always use the pry bar as described in this instruction manual.
ONLY install replacement parts supplied or approved by the manufacturer.
ALWAYS store the pry bar in a dry location.
Step 1: Remove any dirt or other matter from all surfaces.
Step 2: Inspect the pry bar as suggested on p. 3. If deformity, corrosion, rusting, or excessive wear is discovered, DO
NOT use the product.
Step 3: Perform all necessary adjustments, replacements and/or repairs.
Step 4: Make a dated record of any repairs, adjustments and/or replacements.
Label Placement Diagram:
The product should always be labeled as shown in the diagram below. Replace any label that is damaged or not easily
readable.
Label 287: Model, serial no., capacity
(applied to back side of plate)
