Operator’s Manual
2/2/21
EHLTX, MANUAL.DOCX
Copyright 2021, Vestil Manufacturing Corp.
Page
20
of
32
Tools And Supplies.
The following tools and supplies may be needed to install your Electric Hydraulic Scissor Lift Table. These items are
not supplied with the product.
A fork truck or hoist capable of unloading the lift table and setting it in place.
A smooth, level concrete surface on which to mount the lift table.
Four concrete anchors. The customer is responsible for selecting anchors appropriate for the EHLTX model and
concrete floor conditions. DO NOT operate an unsecured lift table.
A power supply and electrical disconnect matching the power unit’s voltage and current requirements. Refer to
the lift table’s data plate, labels on the control enclosure, and the electrical diagrams in this manual for more
information. The end-user is responsible for supplying the required ground-fault and short-circuit protection on
the supply. Motor overload protection is provided by a thermostat built into the motor.
Installation Dimensions.
The bottom views of representative EHLTX lift tables are shown. When installing in a floor pit, provide a clearance of
at least 1/4” but no more than 7/8” clearance on all sides. Consider the routing of electric and hydraulic lines when
designing your pit installation.
