Vestil BR-GL Series, Instruction Manual

Page: 2 / 4

Rev. 5/22/2019 BR-GL Manual
Copyright 2019 Vestil Manufacturing Corp. Page 2 of 4
SIGNAL WORDS
This manual classifies personal injury risks and situations that might cause property damage with
signal words. Signal words indicate the seriousness of injuries that might result if a particular act does,
or does not, occur.
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or
SERIOUS INJURY. Use of this signal word is limited to the most extreme
situations.
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or
SERIOUS INJURY.
Indicates a hazardous situation which, if not avoided, COULD result in MINOR or
MODERATE injury.
Identifies practices likely to result in product/property damage, such as operation
that might damage the product.
HAZARDS
Vestil strives to identify all foreseeable hazards associated with the use of its products. However, no
manual can address every possible risk. The most effective means for avoiding injury are to read all of
the instructions before installing the rack and to apply sound judgement whenever using, inspecting,
and maintaining it.
If this product is used improperly or carelessly, the operator and/or bystanders might
sustain serious personal injuries or even be killed. ALWAYS use the product properly:
•
Read and understand the entire manual before assembling, installing, using or servicing the
product .
Read the manual to refresh your understanding of proper use and maintenance procedures
whenever necessary.
•
Inspect the bicycle rack in accordance with the directions in the
Inspections & Maintenance
section.
Remove the rack from service if it is not in
satisfactory condition
.
•
DO NOT use the rack UNLESS it is securely anchored to the ground.
•
DO NOT remove or obscure any label. All product labels must be readable and undamaged.
•
DO NOT modify the bicycle rack in any way. Unauthorized modifications automatically void the
Limited Warranty on p. 4 and might make the rack unsafe to use .
DIMENSIONS AND BILL OF MATERIALS
Item Part no. Description Quantity
1 31-007-150 Bicycle rack frame
weldment
1
Fasten the rack to the ground
using
5
/
8
” anchor bolts of
appropriate length, i.e. selected
by your building/facility
engineer. Install the bolts
through the 2 bolt holes
(dashed arrows) in the base of
the frame.
1