Vestfrost WFG32, Instructions For Use Manual, Page: 9 / 114

9
GB
Electronic control
The electronic control ensures that the set
temperatures are maintained in the cabinet
compartments. This is accomplished by
complex control of the refrigerating system,
the heating element, and the fan. Following
any power failure, the temperature setting is
reverted to factory defaults:
Upper compartment: 6°C
Lower compartment: 12°C
The electronic controls have the following
functions:
● Temperature setting
● Temperature display
● Automatic defrosting
● High and low temperature alarm
● Light on/off
● Cabinet on/off (push and hold for 3 secs)
Temperature display
The display shows the actual temperature
in the compartments. The temperature
display has a built-in filter that simulates the
actual temperature in the bottles. The dis -
played temperature is therefore not affected
by transient fluctuations in air temperature.
Temperature setting
The temperature is set by using the two
buttons on the control panel. By pushing
a temperature button, the display changes
from actual temperature to set value. By
pushing the button repeatedly, the set value
scrolls through the available temperature
span.
The temperature in the upper compartment
is adjustable from 5-10 °C. The temperature
in the lower compartment is adjustable from
10-18 °C.
Temperature alarm
If the temperature has deviated 3°C from
the chosen set value for at least 1 hour,
the display flashes and Lo / actual respec -
tively Hi / actual temperature are alternately
shown.
It is recommended that wine be served at a
temperature which is a couple of degrees
lower than the desired drinking temperature
as the wine will be warmed slightly when it
is poured into the glass.
Operation and function
fig. 7
fig. 6