Vestfrost WFG32, Instructions For Use Manual, Page: 7 / 114

7
GB
Installation and start-up
Placement
For safety and operational reasons, the ap -
pliance must not be installed outdoors.
The appliance should be placed on a level
surface in a dry, well ventilated room (max.
75% relative air humidity). Never place the
appliance close to sources of heat such as
cookers or radiators, and avoid placing it in
direct sunlight.
Installation
The surface on which the appliance is to be
placed must be level. Do not use a frame
or similar. It is important that the appliance
be absolutely level. It can be levelled by
screwing the adjustable feet at the front of
the appliance up or down (fig. 2).
Use a spirit level to check that the appliance
is absolutely level sideways.
WFG32
is only for free-standing , and
sufficient free air around the appliance must
be ensured. (fig. 4)
The appliances
WFG45 can be installed
as built-in units in kitchen elements or be
placed free-standing (fig. 5).
At built-in condition ensure sufficient airflow
through the kitchen base in front of the ap -
pliance.
WFG45:
Along with your new cabi -
net is a replaceable kick plate which can
be fixed with the two screws. These two
screws are located in the accessories.Hinge
side requires a 5 mm space.
NOTE: The kick plate should not be in -
stalled if the unit installed behind a kitchen
shelf.
fig. 2
If needed there is a kit in the accessories
bag, for fixing the cabinet up against a table
top.
fig. 2
Room temperature
The climate class is stated on the rating
plate (see page 15).
Note: The appliance operates best at room
temperatures between 10° to 32° C
fig. 3