Vestfrost WFG32, Instructions For Use Manual, Page: 12 / 114

12
GB
fig. 8.2
The door can be changed from right-hinged to left-hinged and vice versa as follows:
Change of hinge side - WFG45
1. Lower hinge (Right) 2 . Screws 3 .Door axis 4. Door 5. Top hinge (Righ)
6. Hinge Screws 7. Top hinge (Left) 8. Hole cover 9. Lower hinge (Left)
10. Door limit device 11. Screw
● 1. Open the door to a 90 degrees angle,
take out the 2 screws (2) from lower door
axis (3), remove the door (4), Remove
the axis plate (3) from the door, (Fig. 8.1).
● 2. Unscrew the screw (11) located under -
neath the doorframe and the limit device
(10), and relocate it at left end side of the
door frame. (Fig. 8.1-2)
● 3. Take out the 3 hinge screws (6) from
the top hinge (right) (5) and remove it.
(Fig. 8.3)
● 4. Remove decorative nail (8) from left
top of cabinet and install spare top hinge
(Left) (7) at left top of cabinet with 3
screws. (Fig. 8.4)
● 5. Following the above procedure, install
the spare lower hinge to the left (9). (Fig.
8.5)
● 6. Install and aligned the door.
● 7. Insert the plastic caps to cover the
holes(8).
fig. 8.1
fig. 8.4 fig. 8.3
fig. 8.5
Ensure that the cabinet is not
connected to the mains and
place the cabinet on the back.
SUPPORT THE DOOR !