8
The Hob is supplied with a special seal in order to avoid any liquid ingress in the work
top. Cut out an opening in the top of your kitchen unit that corresponds to the
measurements given in the picture. Apply the self adhesive seal to all edges of the
opening and carefully fit the hob into the opening in such a way that the knobs will be
on the right hand side. Secure by tightening the clamps as in the picture.
The thickness of the top of your kitchen unit must be between the dimensions given
in the picture below. For a thickness of less than the given dimension ‘’25 mm’’ thick
wooden spacers can be inserted between the bracket and undersurface. If the
thickness of the top is greater than given ‘’25 mm’’ slots can be cut in the under
surface of the furniture to house the bracket.
t>25mm
t>25mm
